PENGARUH VARIASI DIAMETER PIPA INPUT DAN PIPA OUTPUT TERHADAP KINERJA POMPA HIDRAM
Bangka Belitung Province is one of the provinces that have a vast potential of agricultural land, with the potential for abundant water resources in an area that is often in contradiction with the conditions in which some regions still lack water. Often the source of water is under the location of settlements or agricultural land, so it is difficult to use it. The use of electric/diesel pumps has significant cost consequences, as some farmers do use diesel pumps to irrigate their farm fields from rivers that are nearby. One technology that is simple and inexpensive to use is the use of a hydram pump. The methodology in this study is that the hydram pump drive is derived from the impact of water entering the pump through a pipe that depends on the flow of flow entering the pump. This study discusses the performance of hydram pumps on variations in the diameter of the Input pipe and Output pipe. The results of the study that the greatest efficiency of hydram pump for discharge of 8 liters/minute is in the variation of the diameter of the Input pipe 1 inch and the Output pipe 1½ inches is 9.5%, while the lowest efficiency in the variation of the Input pipe diameter is 1½ inches and the Output pipe 1½ inches is 6, 2%. The results of the study found that the larger the diameter of the Input pipe and the smaller the diameter of the Output pipe, the greater the efficiency produced at the hydram pump.
 Shodiqin. 2015. Variasi Volume Tabung Tekan: Terhadap Kinerja Pompa Hidram. Jurusan Teknik Mesin Universitas Muhammadiyah Surakarta
 Ageng Yuwono, Aji (2015) Pengaruh Variasi Diameter Pipa Inlet Terhadap Debit Dan Head Pada Pompa Hidram. Diploma Thesis, Universitas Muhammadiyah Surakarta.
 Sulthoni, M. (2011). Pengaruh Diameter Pipa Inlet Terhadap Debit Pemompaan Pompa Hidram.Jurnal Semantic Scholar
 Hasan, M. Thaib. Dkk. 2014. Pengaruh Panjang Pipa Keluaran Terhadap Kinerja Pompa Hidraulic Ram Pump (Hydram). Jurnal Ilmiah Jurutera Volume 01 No. 02 (11.2014) 001-005
Copyright (c) 2019 budi santoso wibowo
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.