Design of Controlling and Monitoring System for Room Temperature, Lighting, Power, and Energy Using Internet of Things

  • Ida Bagus Irawan Purnama Electrical Engineering Department, Politeknik Negeri Bali
  • I Kadek Endra Sutawan Electrical Engineering Department, Politeknik Negeri Bali
  • I Gede Agus Antara Putra Electrical Engineering Department, Politeknik Negeri Bali
  • I Putu Agastia Kama Suika Electrical Engineering Department, Politeknik Negeri Bali
  • I Gede Ketut Sri Budarsa Electrical Engineering Department, Politeknik Negeri Bali
  • I Made Purbhawa Electrical Engineering Department, Politeknik Negeri Bali

Abstract

One goal of a smart home is to save the use of energy. Savings can be made with a control system where the things related to electricity usage will be controlled automatically. This research designs a control system of several parameters in a replica of a room with a monitoring application. Those parameters include room temperature, lighting, voltage, current, power, and energy using the Internet of Things. The room temperature control system uses the DHT11 sensor, the light intensity controller uses the LDR HL01 sensor module, while measuring current, voltage, power, and electrical energy at the load uses the PZEM-004T sensor. The NodeMCU ESP8266 is used as a control center that receives, processes, and sends data to the Blynk application using WiFi. The core of the system is based on the detection of the room temperature threshold and the state of light intensity based on light or dark. From these two conditions, the control center will instruct the relay to turn on or turn off the fan and lighting according to the predefined conditions. If the load is on then the voltage, current, power, and energy data will be acquired and displayed on the Blynk application in real-time.

Keywords: Controlling System, Internet of Things, Monitoring System, Power and Energy, Room Lighting, Room Temperature

Downloads

Download data is not yet available.

References

B. Artono dan F. Susanto, “Wireless Smart Home System Menggunakan Internet of Things”, Jurnal Teknologi Informasi dan Terapan, Vol. 5, No. 1, 2019.

I. Santoso, M. F. Adiwisastra, B. K. Simpony, D. Supriadi, dan D. S. Purnia, ”Implementasi NodeMCU Dalam Home Automation dengan Sistem Kontrol Aplikasi Blynk”, Jurnal Swabumi, Vol. 9, No.1, 2021.

S. Sawidin, D. S. Pongoh, dan A. Ramschie,” Rancang Bangun Sistem Kontrol Temperatur Dan Kelembaban Ruangan Dengan Android”, 9th Industrial Research Workshop and National Seminar, 2018.

V. A. Aspriyanti, W. N. Hidayat, dan Rohmat, ”Pengembangan Smart Insulation Pada Pengatur Suhu Ruang Otomatis Menggunakan Fan Processor dan Arduino Uno”, Proceedings Nasional Conference PKM Center, 2020.

H. Silitonga, ”Pengontrol Suhu Ruangan Otomastis Menggunakan NodeMCU V3 Lolin Dan Sensor DHT 11 Berbasis Internet”, Laporan Tugas Akhir, USU, 2019.

F. Nugroho, M. Saleh, dan A. Elbani, ”Perancangan Sistem Kendali Kipas Angin Otomatis Berbasis Nodemcu V3”, Jurnal Teknik Elektro Untan, Vol.2, No.1, 2020.

F. S. Ningrum dan P. Triadyaksa, “Sistem Otomatisasi dan Kendali Jarak Jauh Lampu Smart House Berbasis NodeMCU ESP8266”, Berkala Fisika, Vol. 23, No. 4, Oktober 2020.

F. Firmansyah, H. Santoso, dan S. Hadi, “Rancang Bangun Smart Lighting Berbasis Internet of Things Untuk Rumah Hemat Energi”, Bachelor Thesis Universitas Bumigora Mataram, 2021.

A. F. Hakim, W. Wedhaswara, dan A. Z. Mardiansyah, “Sistem Pendukung Keputusan Penerangan Ruangan Berbasis IoT Menggunakan Protokol MQTT Dan Fuzzy Tsukamoto”, JTIKA, Vol. 2, No. 2, 2020.

S. J. Soegandhi, H. C. Indrani, dan P. E. D. Tedjokoesomo, “Optimasi Sistem Pencahayaan Buatan pada Budget Hotel di Surabaya”, Jurnal INTRA, Vol. 3, No. 2, 2015.

H. O. Pratama, I G. P. W. W. Wirawan, dan A. Zubaidi, “Adaptive Classroom Berbasis IoT (Internet Of Things), Saklar Lampu Berdasarkan Keberadaan Seseorang Dan Intensitas Cahaya”, JTIKA, Vol. 2, No. 2, September 2020.

P. A. Dermawan, “Studi Evaluasi Perencanaan Instalasi Penerangan Hotel Neo By Aston Pontianak”, Jurnal Teknik Elektro Untan, Vol.2, No.1, 2020.

D. Handarly dan J. Lianda, “Sistem Monitoring Daya Listrik Berbasis IoT (Internet of Thing)”, JEECAE (Journal of Electrical Electronics Control and Automotive Engineering), Vol. 3, No. 2, pp. 205-208, 2018.

Published
2022-10-06
How to Cite
[1]
I. Purnama, I. Sutawan, I. Putra, I. Suika, I. Budarsa, and I. Purbhawa, “Design of Controlling and Monitoring System for Room Temperature, Lighting, Power, and Energy Using Internet of Things”, JurnalEcotipe, vol. 9, no. 2, pp. 140-148, Oct. 2022.
Abstract viewed = 50 times
PDF downloaded = 61 times