Analisis Flyrock Untuk Mengurangi Radius Aman Alat Pada Peledakan Batuan Andesit Di Kecamatan Margaasih, Kabupaten Bandung, Provinsi Jawa Barat

Flyrock Analysis To Reduce The Safe Radius Of The Tools In Andesite Rock Blossing In The District Margaasih, Bandung Regency, West Java Province

  • Shilvyanora aprilia rande ITNY
  • Ardila Yulianti Prodi Teknik Pertambangan, Institut Teknologi Nasional Yogyakarta

Abstract

Bandung regency known to have had to scatter material which be potential sources of revenue of them are material andesit mining sand and also .Research objectives is measuring the estimation of the distance the throw rocks due to maximum blasting , restudying in the determination of a radius of secure at blasting activities by counting the radius of safe to an instrument based on a theory that is compared with actual that had broken out and get constant k in signification fly rock according to alan b.richards and adrian j.moore to adjust to those of the rocks and stemming used .The research was done by counting the throw of maximum rock theoretically menutut alan b .Ricahrds and adrian j .Moore coupled with the observation actual fly rock in the field with the observation use video and the naked eye .Trial done by moving a radius of safe instrument less than 300 m. From the trial data, it is obtained that the maximum throw of the actual rock and the prediction with the theoretical calculation is in accordance with the recommendation of Adrian J. Moore and Alan B. Richard, so the radius to secure the tool is at least 2 times that of the actual throw. With the provision of using stemming, the safe radius for blasting is reduced to 200 m.

Keywords: Keywords: fly rock, safe radius, blasting

Downloads

Download data is not yet available.

References

Abdurrachman, H., Saptono, S. dan Wiyono, B., 2015. Analisis Flyrock Untuk Mengurangi

Radius Aman Alat Pada Peledakan Overburden Penambangan Batubara. Prosiding Seminar Nasional Kebumian Ke-8. Yogyakarta: UPN Veteran Yogyakarta.

Arief Usman, Sudarsono, Indah Setyawati., 2015. Kajian Radius Aman Alat Gali Muat terhadap Flyrock Peledakan pada Pit 4500 Blok 12 PT. Trubaindo Coal Mining Kutai Barat Kalimantan Barat. Jurnal Teknologi Pertambangan Volume 1 Nomor 1 Periode Maret – Agustus 2015.

Ash,RL., 1990. Design Of Blasting Round, ”Surface Mining” B.A kennedy Editor, society for mining, Metallurgy, and exploration.

Fitriansyah, Genta Ramadhan., 2016. Evaluasi Getaran Peledakan Berdasarkan Tingkat Peluruhan Di PT. Dahana Job Site Ck Kjb, Kampung Long Lanuk, Kecamatan Sambaliung, Kabupaten Berau, Provinsi Kalimantan Timur.

Himmatul Aulia Putri., 2016. Analisis Arah dan Jarak Lemparan Fly Rock Akibat Kegiatan Peledakan di PT Dahana Jobsite PT Adaro Indonesia, Kabupaten Tabalong, Provinsi Kalimantan Selatan.

Jimeno, C. Lopez, dkk., 1995. Drilling and Blasting of Rocks, A.A.Balkema publishers, Rotterdam, Netherlands.

Published
2021-09-22
How to Cite
rande, S., & Yulianti, A. (2021). Analisis Flyrock Untuk Mengurangi Radius Aman Alat Pada Peledakan Batuan Andesit Di Kecamatan Margaasih, Kabupaten Bandung, Provinsi Jawa Barat. PROMINE, 9(1), 23-28. https://doi.org/10.33019/promine.v9i1.2025
Section
Articles
Abstract viewed = 606 times
PDF downloaded = 693 times