ANALISA KINERJA MESIN PENCACAH BOTOL PLASTIK TIPE PET
Abstract
Plastic waste production in 2015 reached 146 tons per year. This amount is the highest amount of waste compared to other solid waste sectors. The most plastic waste is packaging plastic waste which is often used to package food and beverages. Because of the amount of waste, plastic waste needs to be processed so that it can be reused into other objects. One of the uses of plastic waste is by carrying out plastic counting to be used again. In a previous study, a scissor-type plastic crusher machine was built with a capacity of 50 kg / hour with a diesel engine. The plastic chopper machine needs to be tested for performance to determine the suitability of the results of realization with the initial design. Engine performance tested and analyzed were engine capacity, noise level, crushing efficiency, and machine vibration and crushing quality. The test results show the actual capacity of the engine is 36.68 kg / hour; the efficiency of the crushing results is 73.37%, the noise level when carrying out the crushing is 80.6 dB, the vibration generated when carrying out the crushing is 4.9 mm / s2, and the yield 73.45% crushing.
Downloads
References
[2] N. Kurniastuti, “Bahaya Sampah Plastik Terhadap Kesehatan dan Lingkungan,” Forum Teknologi, vol. 3, no. 1, pp. 6-14, 2003.
[3] A. E. Latief, N. D. Anggraeni dan A. Sulaeman, “Perancangan Poros dan Mata Pisau Mesin Pencacah Plastik,” dalam Seminar Nasional Tahunan Teknik Mesin XV, Bandung, 2016.
[4] A. E. Latief, N. D. Anggraeni dan D. J. Hermawan, “Perancangan Konstruksi Mesin Pencacah Plastik,” dalam Seminar Nasional Tahunan Teknik Mesin XV, Bandung, 2016.
[5] I. Amal, “Realisasi Mesin Pencacah Plastik Kapasitas 50 kg/jam,” Institut Teknologi Nasional, Bandung, 2016.
[6] I. O. f. Standarization, ISO 10816-1 Mechanical Vibration- Evaluation of Machine Vibration by Measurements on Non-rotating Parts, Geneva: ISO, 1995.
Copyright (c) 2019 Nuha Desi Anggraeni

This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.