INFLUENCE INFLUENCE OF PARAMETERS ON 3D PRINTING PROCESS USING FILLAMENT EAL-FILL CONCERNING OF DIMENSIONAL ACCURACY AND HARDNESS WITH THE TAGUCHI METHOD APPROACH
Abstract
The presence of 3D printing technology in the world of manufacturing has brought big changes to the world. This technology, which is also known as Additive Layer Manufacturing, has actually been around since the 1980s. The emergence of 3D Printing technology is very influential in several industrial fields. Therefore this study was carried out to find out and increase knowledge about the eAl-fill fillament which will be tested using dimensional accuracy and hardness testing on the fillament using the Taguchi method.From the analysis of variance (ANOVA) states that the parameter that has the most influence on the dimension of accuracy is the layer height with a contribution value of 64.233%. Meanwhile, the most influential parameter of hardness is the print temperaure with a contribution value of 41.929%.
Downloads
References
[2] Pham D, Gault R., 1998. A comparison of rapid prototyping technologies, IntJ Mach Tools Manuf., 1998;38:1257–87.
[3] Tontowi, A, E. 2017. Optimization of 3D-Printer Process Parameters for Improving Quality of Polylactic Acid Printed Part, International Journal of Engineering and Technology (IJET), Vol 9 No 2 Apr-May 2017
[4] Firdaus dan Soejono T., 2002. Studi Eksperimental Pengaruh Parameter Proses Pencetakan Bahan Plastik Terhadap Cacat Penyusutan (Shrinkage) Pada Benda Cetak Pnuematics Holder. Jurnal Teknik Mesin, 4(2): 75-85.
[5] Dieter, G.E., 1987, Metalurgi Mekanik, terj. Sriati D., Erlangga, Jakarta, hal. 6.
[6] Furqon, G.R., Firman, S.M., Sugeng, A.P., analisa uji kekerasan pada poros baja ST 60 dengan media pendingin berbeda. Jurnal teknik mesin unsika. Vol. 01 no. 02. 2016.
[7] Wang, M.W., Arifin,F., Huang, J.Y., 2019. Optimaziation of micro molding of a bicon cave structure, international journal of technology, 10 (2) : 269-279
[8] Taguchi, G., Chowdhury, S. and Wu, Y, Taguchi’s Engineering Quality Handbook, 1st ed, John Willey dan Sons, Inc, Hoboken, New Jersey, 2005.Author H., A Book New York Publisher, Year, pp.1-200.
[9] Wang, M.W., Arifin, F., and Kuo, H.L., (2019): Study on micromoulding of a high viewing angle LED lens, Plastics, Rubber and Composites, DOI:10.1080/14658011.2019.1685803.
[10] Jenarthanan, M. P., dan Jeyapaul, R. (2018). Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method. International Journal of Engineering, Science andTechnology. https://doi.org/10.4314/ijest.v5i4.3
[11] Soejanto, I. 2009, Desain Eksperimen Dengan Metode Taguchi, Graha Ilmu, Yogyakarta.
Copyright (c) 2022 Icvan Apriansyah, AHMAD ZAMHERI, FATAHUL ARIFIN
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.
