DESAIN MEKANIK SISTEM PEMILAH SAMPAH PLASTIK OTOMATIS DI TEMPAT PEMBUANGAN AKHIR SAMPAH (TPA)
Abstract
Plastic is a material that is widely used in modern society. You can see products made from plastic, ranging from toys, kitchen utensils, electronics to toothbrushes that are used every day. Plastics are widely used because of the advantages of plastic which is strong, lightweight, easy to form, is a good insulator, non-corrosive and durable. Currently, based on statistical data on Indonesia's domestic solid waste, plastic waste ranks second, namely 64 million tons per year or 14% of total waste production. This large consumption is not matched by the same amount of recycling. Plastic waste can cause problems for the environment because it is very difficult to decompose. The time to decompose plastic waste naturally takes approximately eighty years to completely degrade. Therefore, designing and making a plastic waste sorting tool that uses a waterwheel and koveyor working system, where later when this design has been applied and functions properly it can be useful for sorting plastic waste. When this tool is functional it will be very helpful in the environment of landfills and other places.
Downloads
References
I. N. A, “Kulina : let's Lunch Together,” 9 july 2018. [Online]. Available: https://medium.com/kulina/jenis-jenis-plastik-dan-arti-kode-yang-tertera-3b79d7d8f786. [Diakses 3 April 2020].
W. K. Sugandi, A. Yusuf, T. Herwanto dan S. Maulana, “Uji Kinerja Mesin Pencacah Plastik (Studi Kasus Bank Sampah Tasikmalaya (BST) di Desa Cikunir, Kecamatan Singaparna, Kabupaten Tasikmalaya),” Industrial Research Workshop , 2017.
M. I. Nurhadi, S. Siregar dan N. Hendrarini, “DESAIN MEKANIK SISTEM PEMILAH SAMPAH,” e-Proceeding of Applied Science , vol. 1, p. 2276, 2015.
D. Almanda, . H. Isyanto dan R. Samsinar , “PERANCANGAN PROTOTYPE PEMILAH SAMPAH ORGANIK DAN ANORGANIK MENGGUNAKAN SOLAR PANEL 100 WP SEBAGAI SUMBER ENERGI LISTRIK TERBARUKAN,” jurnal.umj.ac.id/index.php/semnastek, pp. 2407 – 1846, 2460 – 8416, 2018.
D. Cahyadi dan G. F. Azis, “SINTEK,” PERANCANGAN BELT CONVEYOR KAPASITAS 30 TON/JAM UNTUK ALAT ANGKUT KERTAS , vol. 1.
A. Suwandi, M. Sulaiman dan E. Maulana, “PERANCANGAN MESIN EDDY CURRENT SEPARATOR UNTUK PEMILAH SAMPAH LOGAM NON-FERROUS (STUDI KASUS DI KABUPATEN TEGAL),” jurnal.umj.ac.id/index.php/semnastek , 2017.
P. L.E.Aritonang, B. E.C, S. D. K dan J. Prasetyo, “RANCANG BANGUN ALAT PEMILAH SAMPAH CERDAS OTOMATIS,” SNITT, 2017.
H. Susanto, R. H. Setyobudi, K. Abdullah, S. M. Nur, E. Yandri, A. S. Uyun, O. Anne dan J. Burlakovs, “Development of Moving Equipment for Fishermen's Catches using the Portable Conveyor System”.
S. dan s. , “JATI UNIK,” Perhitungan Perencanaan Mesin Pengaduk Middle Waste Asbes Kapasitas 2500 Liter , vol. 2, pp. 74-83, 2019.
A. Junaidi, R. dan A. Hendri, “MODEL FISIK KINCIR AIR SEBAGAI PEMBANGKIT LISTRIK,” Jom FTEKNIK, vol. 1, 2014.
J. Rahmadi, I. Yusuf dan H. Priyatman, “Studi Kelayakan Pemanfaatan Pembangkit Listrik Kincir Air Terapung Di Desa Ella Hilir Kecamatan Ella Hilir Kabupaten Melawi,” Jurnal ELKHA, vol. 7, 2015.
W. P.Marsis dan D. Saputro , ANALISIS REAKTOR ALIR TANGKI PENGADUK pada KAPASITAS 20 M3 dengan TEMPERATUR 1520 C .
A. W. Ibrahim, T. W. Widodo dan T. W. Supardi, “Sistem Kontrol Torsi pada Motor DC,” IJEIS, vol. 6, pp. 93 - 104 , 2016.
N. Nugroho dan S. Agustina, “ANALISA MOTOR DC (DIRECT CURRENT) SEBAGAI PENGGERAK MOBIL LISTRIK,” Mikrotiga, vol. 2, pp. 2355 - 0457 , 2015.
M. N. Yuski, W. Hadi dan A. Saleh, “Rancang Bangun Jangkar Motor DC,” Yuski et al, vol. 2, pp. 98-103 , 2017.
Copyright (c) 2022 Rolan Siregar
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.