RANCANG BANGUN MESIN PEMOTONG KENTANG BERBENTUK STICK

  • Saparin Saparin
  • Yudi Setiawan Universitas Bangka Belitung
  • Edi Irwan Universitas Bangka Belitung
  • Eka Sari Wijianti Universitas Bangka Belitung
Keywords: potato, potato cutting machine, electric motor

Abstract

This research is a design of a potato cutting machine. The ultimate goal of making the machine is the production of potato cubes. In planning the machine will be processed to produce stick-shaped potato pieces. The machine design is made with dimensions of 660 mm x 800 mm x 710 mm using an electric motor ½ Hp. The system of lowering the rotation uses a pully and belt 1: 2 and continued with a gearbox with a ratio of 1:40, the way the engine works is to rotate the crankshaft to move the piston / potato suppressor with a rotation of 17.5 Rpm. The study was conducted 3 times with 1000 grams of potatoes with an average yield of 702 grams of good cut, 27 grams unsuccessful, 271 grams behind. The production capacity of this stick-shaped potato cutting machine is capable of cutting as much as 20.29 kg / hour with a machine production efficiency of 70.02%.

Downloads

Download data is not yet available.

References

Indra, Kus. 2019. Modifikasi Mesin Pengiris Bawang Menggunakan Motor Listrik Dengan Daya 200 Watt. Skripsi. Universitas Bangka Belitung.

James R. Thrower,1976. Technical Statics and Strength Of Materials. Buku Halaman 151.

Maizar, Nurul. 2019. Rancang Bangun Mesin Parut Kelapa untuk Pakan Ternak Ayam Sistem Mata Pisau Horizontal. Skripsi. Universitas Bangka Belitung.

Rosa, Firlya, Saparin. 2018. Anlisa Kecepatan Dan Percepatan Poros Ekaentrik Mesin Penubuk Beras Aruk. Skripsi. Universitas Bangka Belitung.

Siti, Amimah. 2015. Pengembangan Alat Pemotong Tipe Manual Menjadi Stick Kentang (Solanum tuberosum). Diploma thesis, Teknologi Pertanian, Universitas Andalas, Padang.

Tri Prasetyo Aji,2017. Rancang Bangun Dan Analisa Struktur Alat Pencetak Nasi Guna Proses Pencetakan Nasi Pada Usaha Katering. Departemen Teknik Mesin Industri. Fakultas Vokasi. Institut Teknologi Sepuluh November Surabaya.

Wibowo, Angga, C. 2015. Perancangan Alat Pemotong Kentang. Teknik Mesin Universitas Negeri Yogyakarta.

Published
2021-04-14
How to Cite
Saparin, S., Setiawan, Y., Irwan, E., & Wijianti, E. (2021). RANCANG BANGUN MESIN PEMOTONG KENTANG BERBENTUK STICK. Machine : Jurnal Teknik Mesin, 7(1), 25-29. https://doi.org/10.33019/jm.v7i2.2309

Most read articles by the same author(s)

<< < 1 2 3 4 > >>