Pengaruh Perlakuan Panas Pada Clad Bend Pipe (API5L) dengan Pengelasan GTAW Overlay Menggunakan UNS N06625 Terhadap Kekuatan Tarik Material
Abstract
Heat Treatment is a process of heating a material (metal) with a certain temperature and then cooling it using certain media (for example: oil, water, and salt water) with a specified cooling speed. This research used a quenching and tempering heat treatment process on API 5L carbon steel pipe with a diameter of 16 inches (406.4 mm) and a pipe thickness of 1,437 inches (36.5 mm), which previously the carbon steel pipe had an overlay welding process on the inside using UNS N06625 filler metal with protective gas of Argon 99.999% to reduce the corrosion rate along the bending process to become Clad Bend Pipe. The purpose of this study is to find out any effects of heat treatment (Quenching and Tempering) to increase the value of the tensile test results on clad bend pipes.
Downloads
References
Hadi, Qomarul. 2010. Pengaruh Perlakuan Panas pada Baja Konstruksi ST37 Terhadap Distorsi, Kekerasan dan Perubahan Struktur Mikro. Universitas Sriwijaya Jl.Raya Palembang – Prabumulih Km. 32 Kec. Indralaya 30662 Ogan Ilir
ASM International. (1995) ASM Handbook Volume 4 Heat Treating. United States of America
Muthmann, E dan Grimpe, F. 2006. Fabrication of hot induction from LSAW large diameter pipes manufactured from TMCP plate. Mannesmannröhren Mülheim GmbH, Mülheim/Ruhr, Germany.
Sastranegara, Azhari. 2009. Mengenal Uji Tarik dan Sifat-sifat Mekanik Logam. President University
Copyright (c) 2022 Aulia Fajrin

This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.