PENGARUH VARIASI FUEL CORRECTION TERHADAP KONSUMSI BAHAN BAKAR PADA MOBIL TARSIUS GV-2 UNIVERSITAS BANGKA BELITUNG
Abstract
The Energy Efficient Car Competition (KMHE) is an annual competition organized by the national achievement center (puspernas), Bangka Belitung University regularly participates in the KMHE competition starting from 2015 to 2022, but UBB's KMHE car has not been able to compete to win the category of prototype gasoline, car KMHE has many shortcomings, especially fuel consumption which is still relatively high, namely 130 km / liter, one method of saving fuel consumption is by adjusting the length of time the injector opens (fuel correction). This study aims to determine the effect of the fuel correction value with a variation of 0 , -11, -23, and -27 on fuel consumption. The Electronic Control Unit (ECU) used is a programmable type ECU, the test is carried out at various engine speeds (RPM 1000, 2000, 3000, 4000 and 5000) with a 5 minute test time. The results showed that the most efficient data on fuel consumption was at fuel correction -27 at 1000 RPM, namely 4 ml and the highest fuel consumption was at correction 0 at 5000 rpm, which was 67 ml.
Downloads
References
Afwan, M.A. 2019. Pengaruh Penggunaan ECU Standar dan ECU Junken Dengan Variasi Injektor Terhadap Torsi dan Daya Sepeda Motor Yamaha V-Ixion. Skripsi, Jurusan Teknik Mesin Fakultas Teknik. Universitas Negeri Semarang. Semarang.
BRT. 2013. Buku Panduan ECU Juken I-MAX Progammable Fuel Injection. PT. Trimentari Niaga (TMN).
Fahmi, F. & Yuniarto, M. N., 2013. Perancangan dan Unjuk Kerja Engine Control Unit (ECU) Iquteche Pada Motor Yamaha Vixion. JURNAL TEKNIK POMITS, I(1), pp. 1-6.
Hartono, D., M. Paloboran, B. Sudarmanta. 2017. Studi Eksperimental Pengaruh Mapping Waktu Pengapian dan Mapping Durasi Injeksi Serta Rasio Kompresi Terhadap Performansi dan Emisi Gas Buang Engine Cb150r Berbahan Bakar E50. Jurnal Teknik Mesin Indonesia. Vol. 12 No. 2 (Oktober 2017) 77-82.
Hidayat, W. 2012. Motor Bensin Modern. Cetakan Pertama. Jakarta: Rineka Cipta.
Jama, J. dan Wagino. 2008. Teknik Sepeda Motor. Jilid 2. Jakarta: Direktorat Pembinaan Sekolah Menengah Kejuruan.
Pudjanarsa, A., dan Nursuhud, D. 2008. Mesin Konversi Energi. Yogyakarta : Andi.
Rahman, R.M., Dwi widjanarko, M. Burhan rubay wijaya. 2018. Perbedaan Unjuk Kerja Mesin Menggunakan Electronic Control Unit Tipe Racing dan Tipe Standar Pada Sepeda Motor Automatic. Jurnal Dinamika Vokasional Teknik Mesin. Volume 3 Nomor 2 Oktober 2018 Hal 138-143.
Renuraman, J. dan Karthick, M. 2015. Experimental Evaluation of Electronic Port Fuel Injection System in Four Stroke 125cc SI Engine. International Journal For Trends in Engineering & Technology. Volume 5 Issue 2.
Setiyo, M., dan Utoro, L. 2017. Re-mapping Engine Control Unit (ECU) Untuk Menaikkan Unjuk Kerja Mesin Sepeda Motor. Jurnal Mesin Teknologi (SINTEK Jurnal) Volume 11 No. 2. Desember 2017.
Solikin. 2017. Pengaruh Timing Injection dan Timing Pengapian Pada Motor 4 Langkah 110 cc Bahan Bakar Pertamax. Jurnal Teknik Mesin Universitas Muhammadiyah Yogyakarta.
Yunas, M. & Yuniarto, M. N., 2013. Aplikasi ECU Iquteche Pada Mesin Roadrace 130cc. Jurnal Teknik POMITS, Volume 1.
Copyright (c) 2022 budi santoso wibowo
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.
