PENGARUH PARAMETER PENGELASAN TERHADAP HASIL UJI BENDING DENGAN STANDAR AWS PADA BAJA ASTM A36
Abstract
In this modern era, technology is progressing rapidly, including welding techniques. In this welding process, a welder has a manual called WPS (Welding Procedure Specification). The role of WPS in welding is very important, this is because WPS is made to achieve good welding results and according to what is desired. Therefore, research regarding the suitability of WPS with welding results was carried out. This study uses an experimental method by performing GMAW (Gas Metal Arc Welding) welding in the 1G position and the test process is carried out with a bending test. This bending test process is carried out to find out whether the WPS used is in accordance with the desired results or not. In the bending test results that have been carried out by welding experiments twice, the bending test results are 3.528 kN/mm 2 . In this welding process, more optimal results were obtained using the amperage parameters of 94A – 106A and a voltage of 23 V – 25 V. In this process no visual welding defects were found so that this WPS could be used by trainees.
Downloads
Copyright (c) 2023 RIKA VERONIKA
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.