ANALISIS PENGARUH TEKANAN VACUUM PADA PROSES PEMBUATAN KOMPOSIT CARBON FIBER MENGGUNAKAN METODE VACUUM INFUSION
Carbon fiber, komposit, meningkatkan kekuatan, sifat mekanik, tekanan pompa vacuum, vacuum infusion,
Abstract
Abstract
Vacuum infusion is a method of making composite materials by using a vacuum pump to drain and spread the resin in molding. Vacuum infusion can strengthen the mechanical properties of a composite material because the manufacturing process is given a negative pressure which makes the resin or matrix permeate better than the hand lay-up method. Vacuum infusion composites can be used as the main ingredient of a vehicle body due to its strong, flexible nature in its form and manufacture so that it can be shaped as desired. This study examines the effect of vacuum pump pressure on two mechanical properties (impact and bending) of a carbon fiber composite material given an epoxy matrix. The results of this study get an increase in strength of mechanical properties with added vacuum pump pressure.
Keywords : carbon fiber, composite, increase in strength, mechanical properties, Vacuum Infusion, vacuum pump pressure.
Downloads
References
[2] Goren, A. dan Atas, C., 2011. Manufacturing of Polymer Matrix Composites Using Vacuum Assisted Resin Infusion Molding, International Scientific Journal, World Academy of Materials and Manufacturing Engineering, Volume 34 Issue 2, December 2008, Pages 117-120.
[3] Wang, P; Molimard, J; Drapier, S; Vautrin, A; and J.C. Minni, 2011. Monitoring the Resin Infusion Manufacturing Processes Under Industrial Environment Using Distributed Sensors, Journal of Composite Materials 46(6) 691-706.
[4] Yeung, K.K.H. and K.P. Rao, 2014. Mechanical Properties of Boron and Kevlar-49 Reinforced Thermosetting Composites and Economic Implications, Journal of Engineering Science, Vol. 10, 19–29.
Copyright (c) 2020 Setyo Wahyu Eko Utomo
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.
