ANALISA EFISIENSI ISENTROPIK PADA ASH REMOVAL COMPRESSOR DENGAN SOFTWARE COMPUTER AIDED THERMODYNAMICS TABLE 3
DOI:
https://doi.org/10.33019/jm.v11i1.5748Keywords:
Pulang Pisau Steam Power Plant, ash removal compressor, CATT3, isentropic efficiencyAbstract
Steam Power Plant (PLTU) is a plant that relies on kinetic energy from steam to produce electrical energy. One of the components used to run the system in PLTU is an air compressor. In Pulang Pisau Steam Steam Power Plant, Air Screw Compressor is used to meet the needs of compressed air in air instruments and ash removal. This study aims to analyze the isentropic efficiency of ash removal screw compressors 2 and 3 at Pulang Pisau Steam Power Plant by comparing the isentropic value of factory specifications with the isentropic value of actual conditions using Computer Aided Thermodynamics Table 3 (CATT3) software. The method carried out in this study is divided into two, namely taking actual data in the field and calculating data using CATT3 software. The results showed that the average isentropic efficiency value of ash removal compressor 2 is 84% and ash removal compressor 3 is 83% with a range of values of 77% - 89%. From these results, it can be concluded that ash removal compressors 2 and 3 at the Pulang Pisau Steam Power Plant are still working properly.
Downloads
References
[2] Lagonggan, R. G. M. C. M. L. S. P. (2020). Studi Efisiensi Penggunaan Energi Listrik di Perseroan Terbatas Multi Nabati Sulawesi Unit Maleo.
[3] Firmansyah, lham Arif, & Aqli Mursadin. (2021). Analisis Penurunan Sistem Kompresor Pada Pembangkit Di PT. Indocement Tunggal Prakarsa, Tbk. P-12 Tarjun Kalimantan Selatan.
[4] Indrawan, D., & Dominite, A. (2020). Analisa Overheating Pada Compressor Sullair LS16-60/75/100. In Jurnal Terapan Teknik Mesin (Vol. 1, Issue 1).
[5] Pradipta, & Ivan Ade. (2022). Performance Analysis of Electrostatic Precipitator (ESP) Based on Secondary Current Transformer at Tanjung Jati B Unit 3 Coal-Fired Power Plant.
[6] Indriyati Tengku Syahilla, Malik Alfian, & Alwinda Yosi. (2019). Kajian Pengaruh Pemanfaatan Limbah FABA (Fly Ash dan Bottom Ash) pada Konstruksi Lapisan Base Perkerasan Jalan. Jurnal Teknik, 13(2).
[7] Sutrisna, H., & Aldrin. (2023). Analisis Pengaruh Komposit Berbahan Limbah Plastik Low Density Polyethylene dan Bottom Ash sebagai Bahan Alternatif Batako. In Jurnal Teknik Mesin UTS (Issue 1). https://jurnal.uts.ac.id/index.php/gearftrs
[8] Moran, M. J., & Shapiro, H. N. (2010). Fundamentals of Engineering Thermodynamics. John Wiley & Sons, Inc.
[9] Yunus A. Çengel, & Ghajar, A. J. (2015). Heat and Mass Transfer Fundamentals & Applications.
[10] Puspawan Angky. (2014). Analysis of Compressor Isentropic Efficiency Type Sullair Screw Air Compressor in Factory Of Hot Strip Mill Case Study in PT. Krakatau Steel (Persero) Cilegon by Using Computer Aided Thermodynamics Table 2 (CATT2). In Jurnal Ilmiah Bidang Sains Teknologi Murni Disiplin.
Downloads
Published
Issue
Section
License
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.
