CAMPURAN KULIT KETELA POHON DAN CANGKANG BUAH KARET SEBAGAI BAHAN ALTERNATIF PEMBUATAN BRIKET
Cassava and rubber shell can be used as raw material of briquettes. The purpose of this research is to know the best drying temperature for briquettes and mixing of cotton and rubber shells against moisture content, density, ash content, volatile content, carbon content and heat value. Materials briquettes in this study are cassava leather and rubber shell with starch starch adhesive and made at heating temperature of 1000C, 2000C and 2500C. The results showed that the best temperature in the manufacture of briquettes was found at 2500C and the best mixture was found in a mixture composition of 25% of the skin of the rubber fruit and 75% of the cassava leather. The lowest water content is 7.10%, and the highest carbon content is 45.98% and has the highest calorific value of 6901,451Kal / g.
 Irawan, Dwi. 2011. Pemanfaatan Kotoran Ayam Dengan Campuran Cangkang Karet Sebagai Bahan Bakar Alternatif. Jurusan Teknik Mesin Universitas Muhammadiyah Metro.
 Ojolo dan Bamgboye, 2005 ,Thermochemical Conversion of Municipal Solid Waste to Produce Fuel and Reduce Waste Agricultural Engineering International: the CIGR Ejournal. Vol. VII. Manuscript EE 05 006. September, 2005.
 Phan, AN, Ryu, C., Sharifi, V.N., Swithenbank, J., 2008, Characterisation of Slow Pyrolisis Products from Segregated Wastes for Energy Production, J.Anal.Appl.Pyrolisis 81 (2008), pp. 65-71.
 Saptoadi, H., 2006, The Best Biobriquette Dimension and its Particle Size, The 2nd Joint International Conference on “Sustainable Energy and Environment (SEE 2006)” 21-23 November, Bangkok, Thailand.
 Tribunnews Palembang, 24 April 2015 (online) http://palembang.tribunnews.com/2015/04/24/cadangan-minyak-indonesia-tinggal-11-tahun-lagi Diakses pada tanggal 15 Mei 2015.
 Zapusek, A., Wirtgen, C., Weigandt, J. dan Lenart, F., 2003, Characterisation of Carbonizate Produced from Velenje Lignite In Lab-Scale Reactor, Acta Chim. Slov. 50, 789798.
Copyright (c) 2019 Yudi Setiawan, Eka Sari Wijianti, Ibnu Dinar
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.