PENGARUH JARAK SEL BUKAAN BALOK TERHADAP KEKUATAN MATERIAL DAN KARAKTERISTIK GETARAN
Abstract
Abstrak
Balok banyak digunakan dalam aplikasi struktur baik mekanikal maupun sipil. Dalam prakteknya balok yang digunakan di lapangan tidaklah homogen, sehingga akan menyebabkan terjadinya konsentrasi tegangan pada bagian-bagian tertentu. Dampak lanjutannya adalah terjadi perubahan kekuatan, kekakuan dan respon getaran ketika balok memperoleh eksitasi dari luar. Penelitian ini dilakukan dengan menggunakan 2 metode, yaitu eksperimen dan FEM. Karakteristik balok yang dipelajari adalah defleksi, tegangan, frekuensi dan konstanta redaman. Pada penelitian ini digunakan aluminum AL 6063 yang diberikan sel berbentuk lingkaran, persegi dan belah ketupat. Jarak antar sel masing-masing 40mm dan 60mm. Dari hasil pengujian diperoleh nilai defleksi dan tegangan terkecil terjadi pada balok dengan sel berbentuk lingkaran. Semakin jauh jarak antar sel maka tegangan, defleksi, frekuensi dan konstanta redamannya juga semakin kecil
Downloads
References
[2] N.K. Jain. Analysis of Stress Concentration and Deflection in Isotropic and Orthotropic Rectangular Plates with Central Circular Hole under Transverse Static Loading. World Academy of Science, Engineering and Technology 36, pp. 446-452, (2009).
[3] Arshadnejad S., Goshtasbi K., dan Aghazadeh J. Stress Concentration Analysis Between Two Neighboring Circular Holes Under Internal Pressure of a Non-Explosive Expansion Material. Yerbililemri 30(3), pp. 259-270 (2009).
[4] N.G. Tsouvalis and M.J. Kollarini. Experimental Investigation of Strain Concentrations Caused by Inserts in Sandwich Beams. Journal Compilation 44, pp. 317-326, (2008).
[5] The Aluminum Association, Aluminum for Automotive Body Sheet Panels, (1998).
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.