RANCANG BANGUN MESIN PEMOTONG KENTANG BERBENTUK STICK
Abstract
This research is a design of a potato cutting machine. The ultimate goal of making the machine is the production of potato cubes. In planning the machine will be processed to produce stick-shaped potato pieces. The machine design is made with dimensions of 660 mm x 800 mm x 710 mm using an electric motor ½ Hp. The system of lowering the rotation uses a pully and belt 1: 2 and continued with a gearbox with a ratio of 1:40, the way the engine works is to rotate the crankshaft to move the piston / potato suppressor with a rotation of 17.5 Rpm. The study was conducted 3 times with 1000 grams of potatoes with an average yield of 702 grams of good cut, 27 grams unsuccessful, 271 grams behind. The production capacity of this stick-shaped potato cutting machine is capable of cutting as much as 20.29 kg / hour with a machine production efficiency of 70.02%.
Downloads
References
Indra, Kus. 2019. Modifikasi Mesin Pengiris Bawang Menggunakan Motor Listrik Dengan Daya 200 Watt. Skripsi. Universitas Bangka Belitung.
James R. Thrower,1976. Technical Statics and Strength Of Materials. Buku Halaman 151.
Maizar, Nurul. 2019. Rancang Bangun Mesin Parut Kelapa untuk Pakan Ternak Ayam Sistem Mata Pisau Horizontal. Skripsi. Universitas Bangka Belitung.
Rosa, Firlya, Saparin. 2018. Anlisa Kecepatan Dan Percepatan Poros Ekaentrik Mesin Penubuk Beras Aruk. Skripsi. Universitas Bangka Belitung.
Siti, Amimah. 2015. Pengembangan Alat Pemotong Tipe Manual Menjadi Stick Kentang (Solanum tuberosum). Diploma thesis, Teknologi Pertanian, Universitas Andalas, Padang.
Tri Prasetyo Aji,2017. Rancang Bangun Dan Analisa Struktur Alat Pencetak Nasi Guna Proses Pencetakan Nasi Pada Usaha Katering. Departemen Teknik Mesin Industri. Fakultas Vokasi. Institut Teknologi Sepuluh November Surabaya.
Wibowo, Angga, C. 2015. Perancangan Alat Pemotong Kentang. Teknik Mesin Universitas Negeri Yogyakarta.
Copyright (c) 2021 Saparin Saparin, Yudi Setiawan, Edi Irwan, Eka Sari Wijianti
This work is licensed under a Creative Commons Attribution 4.0 International License.
The paper presented is assumed not to contain proprietary materials that are not protected by patents or patent applications. Responsibility for technical content and for protection from proprietary materials is the responsibility of the author and their organization and not the responsibility of the machine or its editorial staff. The primary author (first / appropriate) is responsible for ensuring that the article has been viewed and approved by all other authors. It is the responsibility of the author to obtain all copyright release permits required for the use of any copyrighted material in the manuscript before submission.
